16*10/100/1000Base-T + 8*1G Combo + 4*1G/2.5GBase-X SFP+
Layer 2+ Managed Industrial Rack-mount Ethernet Switch
Rack mountable; Operation temperature -40°C to 80°C
AC/DC redundant power supply, 3 Option:
1. Dual AC 100-240V 50/60Hz input,
2. AC 100-240V 50/60Hz and DC 36-75V input
3. Dual DC 36-75V input
16*10/100/1000Base-T + 8*1G Combo + 4*1G/2.5GBase-X SFP+
Layer 2+ Managed Industrial Rack-mount Ethernet Switch
Rack mountable; Operation temperature -40°C to 80°C
AC/DC redundant power supply, 3 Option:
1. Dual AC 100-240V 50/60Hz input,
2. AC 100-240V 50/60Hz and DC 36-75V input
3. Dual DC 36-75V input
Overview
The DPTEK DK3320MI-16T8GC4S is the highly reliable Layer 2+ managed industrial Ethernet switch with 16-port 10/100/1000Base-T RJ45, 8-port 1000Base Combo and 4-port 1G/2.5GBase-X SFP. With full gigabit capability, it can provide high performance and the ability to quickly transfer large amounts of video, voice, and data across a network. It supports DI/DO/RS485/Modbus data, G.8032 ERPS, MSTP/RSTP/STP redundancy technologies, Layer 3 IPv4/IPv6 static routing features and powerful Layer 2 management and secure function, which all making them ideal for large-scale industrial networks.
DK3320MI-16T8GC4S is also a high cost-effective easy-to-use device, which provides essential industrial Ethernet networking function, including wide range voltage input with redundant power design AC, DC or AC/DC selection, robust IP40 fan-less housing with rack-mount installation, wide operation temperature from -40°C to 80°C as well as high-level EMI/EMC capability. It is the best choice for heavy industrial factory, transportation, oil & gas, chemical, IP Surveillance and processing automation area where environmental conditions are harsh and critical.
Features
➢ 16*10/100/1000Base-T, 8*1G Combo RJ45/SFP, 4*1000/2500Base-X SFP
➢ AC/DC redundant power supply with polarity reverse/over-voltage/over-current protection
➢ Support USB one key configuration and upgrading
➢ Support DI/DO/RS485/Modbus data
➢ Layer 3 feature: Support IPv4/IPv6 static routing
➢ Layer 2 features: VLAN; ERPS, STP/RSTP/MSTP; Link aggregation, IGMP snooping, port mirroring, QinQ, 802.1X, port isolation, RMON, NTP client, DHCP snooping/client, Ping/Tracert test, ACL, QoS and SFP DDM function
➢ Management and maintenance: IPv4 and IPv6 management; Support Web, SNMP, CLI, Telnet/SSH management method; Support user management, system log, configuration upload/download through web interface, firmware upgrade via HTTP/TFTP/USB
➢ Support G.8032 ERPS protocol, recovery time ≤20ms
➢ Support 6KV surge protection and ESD: Air-15kV, Contact-8kV Protection
➢ IP40 fan-less and rack-mount hardware design
➢ Operation temperature: -40°C ~+ 80°C
Model No. | DK3320MI-16T8GC4S | |||
Interface | 1G/2.5G Fiber ports | 10/100/1000M RJ45 | Gigabit Combo | |
4 | 16 | 8 | ||
Ethernet | 16*10/100/1000Base-T RJ45 8*COMBO SFP/RJ45 4*1000/2500Base-X SFP | |||
Management port | 1*RJ45 Console port,1*USB 2.0 for configuration and firmware update | |||
Data channel | 1 channel RS485 1 channel DI(digital input) 1 channel DO(digital output) | |||
Standard | IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Ethernet IEEE 802.3ab 1000Base-T Ethernet IEEE 802.3z 1000Base-X Ethernet IEEE802.3x Flow Control and Back Pressure IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1Q VLAN ITU-T G.8032 ERPS IEEE 802.1X Port Authentication Network Control IEEE 802.1ab LLDP IEEE 802.3ad LACP | |||
LED Indicators | ||||
P (Power indicator) | Off: the device is power off or failed | On: the device power on is normal | ||
S (System status indicator) | Blinking: device initialization | On: device on normal operation | ||
USB (USB status indicator) | Off: USB flash drive not insert or not detected by device | |||
On: USB flash drive is detected by device | ||||
Blinking: the device is reading and writing the data from USB flash drive | ||||
ALM(Fault status indicator) Red | Off: Device on normal working state | On: Fault alarm | ||
1-16 (Copper ports indicators) Green | Off: ports link down | |||
On: ports link up | ||||
Blinking: data on TX/RX | ||||
1-16(Copper speed indicators) Yellow | Off: ports on 10/100M | |||
On: ports on 1000M | ||||
17-28(Fiber ports indicators) Green | Off: ports link down | |||
On: ports link up | ||||
Blinking: data on TX/RX | ||||
Power parameter | ||||
Input voltage | 36-75VDC 100~240VAC redundant power input | |||
Input current | 1A DC/AC input Max | |||
Total power consumption | Full loading ≤32W | |||
Connector | Removable 2-pin terminal block | |||
Reverse polarity protection | Support | |||
Over-voltage protection | Support | |||
Over-current protection | Support | |||
Layer 2 function | ||||
Port aggregation | Support GE port aggregation Support 2.5GE aggregation Support static aggregation Support dynamic aggregation | |||
Port features | Support IEEE802.3x flow control, Support port traffic statistics, Support port isolation Support network storm suppression based on port bandwidth percentage | |||
VLAN | Support access mode Support trunk mode Support hybrid mode | |||
VLAN Classification | Mac Based VLAN IP Based VLAN Protocol Based VLAN | |||
QinQ | Port-based QinQ VLAN-based QinQ Flow-based QinQ | |||
Port mirroring | Many to one port mirroring | |||
Ring network protocol | Support STP、RSTP、MSTP Support G.8032 ERPS protocol,single ring, sub Ring and associated sub ring Recovery time ≤20ms | |||
DHCP | Support DHCP Client Support DHCP Snooping | |||
Multicast | IGMP V1,V2,V3 IGMP snooping | |||
ACL | IP Standard ACL MAC extend ACL IP extend ACL | |||
QoS | Support QoS Class, Remarking Support SP, WRR queue scheduling Ingress Port-based Rate-limit Egress Port-based Rate-limit Support Policy-based QoS | |||
Security | Support Dot1x,port authentication,MAC authentication,RADIUS service Support port-security Support IP Source Guard,IP/Port/MAC binding Support ARP-check and ARP packet filtering for illegal users Support port isolation | |||
Management & maintenance | Support LLDP Support user management and login authentication Support SNMPV1/V2C/V3 Support web management, HTTP1.1, HTTPS Support Syslog and alarm grading Support RMON(Remote Monitoring) alarm Support NTP Support temperature monitoring Support Ping , TRACERT Support optical transceiver DDM function Support TFTP Client Support Telnet Server Support SSH Server Support IPv6 Management Support TFTP, web upgrading Support USB upgrading Support USB importing configuration | |||
Layer 3 function | ||||
ARP | ARP table aging | |||
IPv4 / IPv6 | Static routing | |||
Switching features | ||||
Switching capacity | 68Gbps | |||
Packet forwarding rate | 101Mpps | |||
MAC address table | 16K | |||
VLAN | 4K | |||
Buffer | 12M bit | |||
Forwarding delay | <5us | |||
Jumbo Frame | Support 10Kbytes | |||
MDX/MIDX | Support | |||
Watchdog | Support | |||
Mechanical structure | ||||
Case protection | IP40 | |||
Installation method | Rack mountable | |||
Dimension(W*D*H)mm | 440*44*280mm | |||
Weight | 5.2 kg | |||
Operating environment | ||||
Operating temperature | -40℃~+ 80℃ | |||
Storage/transportation temperature | -40℃~+ 85℃ | |||
Relative humidity | Operation humidity: 10%-90%RH Storage humidity: 5%-95%RH | |||
Industrial Standard | ||||
EMS | Surge protection of power: IEC 61000-4-5 DC:6KV/6KV (8/20us), AC: 4K/2K Surge protection of Ethernet ports: IEC 61000-4-5 6KV/2KV(10/700us) RS:IEC 61000-4-3 80 MHz-1 GHz:10 V/m EFT:IEC 61000-4-4 power 4K, signal 2K CS:IEC 61000-4-6 10V ESD:IEC 61000-4-2 Contact: 8K;Air: 15K | |||
EMI | FCC Part 15B Class A | |||
Shock | IEC 60068-2-27 | |||
Free fall | IEC 60068-2-32 | |||
Vibration | IEC 60068-2-6 | |||
Certification | CE/FCC/RoHS | |||
Warranty | 5 years |
Model | Description |
DK3320MI-16T8GC4S-2AC | Layer 2+ managed industrial Ethernet switch with 4*1000/2500Base-X SFP ports, 16*10/100/1000Base-T RJ45 and 8*1G Combo RJ45/SFP ports. Dual AC 100-240V 50/60Hz input, rack mountable; Operation temperature -40°C to 80°C |
DK3320MI-16T8GC4S-AC/DC | Layer 2+ managed industrial Ethernet switch with 4*1000/2500Base-X SFP ports, 16*10/100/1000Base-T RJ45 and 8*1G Combo RJ45/SFP ports. AC 100-240V 50/60Hz and DC 36-75V input, rack mountable; Operation temperature -40°C to 80°C |
DK3320MI-16T8GC4S-2DC | Layer 2+ managed industrial Ethernet switch with 4*1000/2500Base-X SFP ports, 16*10/100/1000Base-T RJ45 and 8*1G Combo RJ45/SFP ports. Dual DC 36-75V input, rack mountable; Operation temperature -40°C to 80°C |