16*100/1000Base-X SFP + 8*1G Combo + 4*1G/2.5/10GBase-X SFP+
Layer 2+ Managed Industrial Rack-mount Ethernet Switch
Rack mountable; Operation temperature -40°C to 80°C
AC/DC redundant power supply, 3 Option:
1. Dual AC 100-240V 50/60Hz input,
2. AC 100-240V 50/60Hz and DC 36-75V input
3. Dual DC 36-75V input
16*100/1000Base-X SFP + 8*1G Combo + 4*1G/2.5/10GBase-X SFP+
Layer 2+ Managed Industrial Rack-mount Ethernet Switch
Rack mountable; Operation temperature -40°C to 80°C
AC/DC redundant power supply, 3 Option:
1. Dual AC 100-240V 50/60Hz input,
2. AC 100-240V 50/60Hz and DC 36-75V input
3. Dual DC 36-75V input
Overview
The DPTEK DK3320MI-16S8GC4X is the highly reliable Layer 3 managed industrial fiber switch with 16-port 100/1000Base-X SFP, 8-port 1000Base Combo and 4-port 10G Base-X SFP+. With full gigabit downlink and 10G uplink capability, it can provide high performance and the ability to quickly transfer large amounts of video, voice, and data across a network. It supports DI/DO/RS485/Modbus data, G.8032 ERPS, MSTP/ RSTP/STP redundancy technologies and supports Layer 3 static routing functionality, which all making them ideal for large-scale industrial networks.
DK3320MI-16S8GC4X is also a high cost-effective easy-to-use device, which provides essential industrial Ethernet networking function, including wide range voltage input with redundant power AC, DC or AC/DC selection, robust IP40 fan-less housing with rack-mount installation, wide operation temperature from -40°C to 80°C as well as high-level EMI/EMC capability. It is the best choice for heavy industrial factory, transportation, oil & gas, chemical, IP Surveillance and processing automation area where environmental conditions are harsh and critical.
Features
➢ 16*100/1000Base-X SFP, 8*1000Base Combo, 4*1G/2.5/10GGBase-X SFP+
➢ AC/DC redundant power supply with polarity reverse/over-voltage/over-current protection
➢ Support USB one key configuration and upgrading
➢ Support DI/DO/RS485/Modbus data
➢ Layer 3 feature: Support IPV4/IPV6 static routing
➢ Layer 2 features: VLAN; ERPS, STP/RSTP/MSTP; Link aggregation, IGMP snooping, port mirroring, QinQ, 802.1X, port isolation, RMON, NTP client, DHCP snooping/client, Ping/Tracert test, ACL, QoS and SFP DDM function
➢ Management and maintenance: IPv4 and IPv6 management; Support Web, SNMP, CLI, Telnet/SSH management method; Support user management, system log, configuration upload/download through web interface, firmware upgrade via HTTP/TFTP/USB
➢ Support G.8032 ERPS protocol, recovery time ≤20ms
➢ Support 6KV surge protection and ESD: Air-15kV, Contact-8kV Protection
➢ IP40 fan-less and rack-mount hardware design
➢ Operation temperature: -40°C ~+80°C
Model No. | DK3320MI-16S8GC4X | |||
Interface | 10G Fiber ports | 100/1000M Fiber ports | Gigabit Combo | |
4 | 16 | 8 | ||
Ethernet | 16*100/1000Base-X SFP 8*COMBO SFP/RJ45 4*1G/2.5G/10GBase-X SFP+ | |||
Management port | 1*RJ45 Console port,1*USB 2.0 | |||
Data channel | 1 channel RS485 1 channel DI(digital input) 1 channel DO(digital output) | |||
Standard | IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Ethernet IEEE 802.3ab 1000Base-T Ethernet IEEE 802.3z 1000Base-X Ethernet IEEE 802.3ae 10Gb/s Ethernet IEEE802.3x Flow Control and Back Pressure IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1Q VLAN ITU-T G.8032 ERPS IEEE 802.1X Port Authentication Network Control IEEE 802.1ab LLDP IEEE 802.3ad LACP | |||
LED Indicators | ||||
P (Power indicator) | Off: the device is power off or failed | On: the device power on is normal | ||
S (System status indicator) | Blinking: device initialization | On: device on normal operation | ||
USB (USB status indicator) | Off: USB flash drive not insert or not detected by device | |||
On: USB flash drive is detected by device | ||||
Blinking: the device is reading and writing the data from USB flash drive | ||||
ALM(Fault status indicator) Red | Off: Device on normal working state | On: Fault alarm | ||
1-8 (Copper ports indicators) Green | Off: ports link down | |||
On: ports link up | ||||
Blinking: data on TX/RX | ||||
1-8(Copper speed indicators) Yellow | Off: port speed is 10/100M | |||
On: port speed is 1000M | ||||
9-28(Fiber ports indicators) Green | Off: ports link down | |||
On: ports link up | ||||
Blinking: data on TX/RX | ||||
Power parameter | ||||
Input voltage | 36-75VDC 100~240VAC redundant power input | |||
Input current | 1.2A DC/AC input Max | |||
Total power consumption | Full loading ≤40W | |||
Connector | Removable 4-pin terminal block AC socket | |||
Reverse polarity protection | Support | |||
Over-voltage protection | Support | |||
Over-current protection | Support | |||
Layer 2 function | ||||
Port aggregation | Support GE port aggregation Support 2.5GE aggregation Support 10GE aggregation Support static aggregation Support dynamic aggregation | |||
Port features | Support IEEE802.3x flow control, Support port traffic statistics, Support port isolation Support network storm suppression based on port bandwidth percentage | |||
VLAN | Support access mode Support trunk mode Support hybrid mode | |||
VLAN Classification | Mac Based VLAN IP Based VLAN Protocol Based VLAN | |||
QinQ | Port-based QinQ VLAN-based QinQ Flow-based QinQ | |||
Port mirroring | Many to one port mirroring | |||
Ring network protocol | Support STP、RSTP、MSTP Support G.8032 ERPS protocol,single ring, sub Ring and associated sub ring Recovery time ≤20ms | |||
DHCP | Support DHCP Client Support DHCP Snooping | |||
Multicast | IGMP V1, V2, V3 IGMP snooping | |||
ACL | IP Standard ACL MAC extend ACL IP extend ACL | |||
QoS | Support QoS Class, Remarking Support SP, WRR queue scheduling Ingress Port-based Rate-limit Egress Port-based Rate-limit Support Policy-based QoS | |||
Security | Support Dot1x,port authentication,MAC authentication,RADIUS service Support port-security Support IP Source Guard,IP/Port/MAC binding Support ARP-check and ARP packet filtering for illegal users Support port isolation | |||
Management & maintenance | Support LLDP Support user management and login authentication Support SNMPV1/V2C/V3 Support web management, HTTP1.1, HTTPS Support Syslog and alarm grading Support RMON (Remote Monitoring) alarm Support NTP Support temperature monitoring Support Ping, TRACERT Support optical transceiver DDM function Support TFTP Client Support Telnet Server Support SSH Server Support IPv6 Management Support TFTP, web upgrading Support USB upgrading Support USB importing configuration | |||
Layer 3 function | ||||
ARP | ARP table aging | |||
IPv4/ IPv6 | Static routing | |||
Switching features | ||||
Switching capacity | 128Gbps | |||
Packet forwarding rate | 190.4Mpps | |||
MAC address table | 16K | |||
VLAN | 4K | |||
Buffer | 12M bit | |||
Forwarding delay | <5us | |||
Jumbo Frame | Support 10Kbytes | |||
MDX/MIDX | Support | |||
Watchdog | Support | |||
Mechanical structure | ||||
Case protection | IP40 | |||
Installation method | Rack mountable | |||
Dimension(W*D*H)mm | 440*44*280mm | |||
Weight | 5 kg | |||
Operating environment | ||||
Operating temperature | -40℃~+ 80 ℃ | |||
Storage/transportation temperature | -40℃~+ 85℃ | |||
Relative humidity | Operation humidity: 10%-90%RH Storage humidity: 5%-95%RH | |||
Industrial Standard | ||||
EMS | Surge protection of power: IEC 61000-4-5 DC:6KV/6KV (8/20us), AC: 4K/2K Surge protection of Ethernet ports: IEC 61000-4-5 6KV/2KV(10/700us) RS:IEC 61000-4-3 80 MHz-1 GHz:10 V/m EFT:IEC 61000-4-4 power 4K, signal 2K CS:IEC 61000-4-6 10V ESD:IEC 61000-4-2 Contact: 8K;Air: 15K | |||
EMI | FCC Part 15B Class A | |||
Shock | IEC 60068-2-27 | |||
Free fall | IEC 60068-2-32 | |||
Vibration | IEC 60068-2-6 | |||
Certification | CE/FCC/RoHS | |||
Warranty | 5 years |
Model | Description |
DK3320MI-16S8GC4X-2AC | Layer 2+ managed industrial Ethernet switch with 4*1G/2.5G/10G SFP+ fiber ports, 16*100/1000Base-X and 8*1G Combo RJ45/SFP ports. Dual AC 100-240V 50/60Hz input, rack mountable; Operating temperature: -40°C ~+80°C |
DK3320MI-16S8GC4X-AC/DC | Layer 2+ managed industrial Ethernet switch with 4*1G/2.5G/10G SFP+ fiber ports, 16*100/1000Base-X and 8*1G Combo RJ45/SFP ports. AC 100-240V 50/60Hz and DC 36-75Vinput, rack mountable; Operating temperature: -40°C ~+80°C |
DK3320MI-16S8GC4X-2DC | Layer 2+ managed industrial Ethernet switch with 4*1G/2.5G/10G SFP+ fiber ports, 16*100/1000Base-X and 8*1G Combo RJ45/SFP port. Dual DC 36-75V input, rack mountable; Operating temperature: -40°C ~+80°C |