DK3210MI-4FP1FS
4*10/100Base-TX PoE + 1*100Base-FX SFP
Layer 2 Managed Industrial PoE Ethernet Switch
Complies with IEEE802.3af PoE and IEEE802.3at PoE+ standard
DC12-58V input, redundant dual power supply，
Operation temperature: -40°C～+75°C
Din-rail installation
- Parameters
4*10/100Base-TX PoE + 1*100Base-FX SFP
Layer 2 Managed Industrial PoE Ethernet Switch
Complies with IEEE802.3af PoE and IEEE802.3at PoE+ standard
DC12-58V input, redundant dual power supply，
Operation temperature: -40°C～+75°C
Din-rail installation
Overview
The DPTEK DK3210MI-4FP1FS series are highly reliable managed industrial PoE switch with 4-port 10/100Base-TX PoE and 1-port 100Base-FX fiber optical interface. They comply with IEEE802.3af, IEEE802.3at standard PoE protocol, the Max power consumption can reach 30W (PoE+) per port. They support ERPS redundant network and the self-recovery mechanism is less than 20ms on full load which allows you to scheme a reliable Ethernet network by building a redundant ring topology as your back-up solution. DK3210MI-4FP1FS series support Web/SNMP/Telnet management, the managed features are such as QoS, VLAN, IGMP, Port mirroring, 802.1X, LLDP, Fiber transceiver DDM, PoE management and so on.
DK3210MI-4FP1FS series are also high cost-effective easy-to-use devices, which provide essential industrial Ethernet networking function, including wide range power input 44-57VDC, redundant power design with polarity reverse protection, robust IP40 fan-less housing with Din-rail installation, wide operation temperature from -40°C to 75°C as well as high-level EMI/EMC capability. It is the best choice for heavy industrial factory, transportation, oil & gas, chemical, IP Surveillance and processing automation area where environmental conditions are harsh and crucial.
Features
➢ 4*10/100Base-TX RJ45 PoE ports, 1*100Base-FX SFP (SC/FC/ST optional) ports
➢ DC 44~57V input, redundant power supply with polarity reverse/over-voltage protection
➢ Complies with IEEE802.3af PoE and IEEE802.3at PoE+ standard
➢ Support Layer 2 management function:
VLAN/Port Mirroring/IGMP/QoS/LLDP/802.1X/Fiber transceiver DDM/
PoE management/IPV6 management/Web/SNMP/Telnet/TFTP/Web upgrading
➢ Support G.8032 ERPS protocol, recovery time ≤20ms
➢ Support 4KV surge protection and ESD: Air-15kV, Contact-8kV Protection
➢ IP40 fan-less and Din-rail hardware design
➢ Operation temperature: -40°C ~+75°C
Model No. | DK3210MI-4FP1FS | ||
Interface | Fiber port | Copper RJ45 ports | |
1 | 4 | ||
Ethernet | 4*10/100Base-TX RJ45 PoE 1*100Base-FX SFP（SC/ST/FC optional） | ||
Management port | 1*RJ45 Console | ||
Standard | IEEE 802.3 10Base-T IEEE 802.3u 100Base-TX IEEE 802.3x flow control and back pressure IEEE 802.1D spanning tree protocol IEEE 802.1w rapid spanning tree protocol IEEE 802.1Q VLAN tagging ITU-T G.8032 ERPS IEEE 802.1X port authentication network control IEEE 802.1ab LLDP IEEE 802.3ad LACP IEEE802.3af Power Over Ethernet IEEE802.3at Power Over Ethernet plus PSE | ||
LED Indicators | |||
P(Power indicator) Green | Off: the device is power off or failed | Off: the device is power off or failed | |
S(System status indicator) | Blinking: device initialization | On: device on normal operation | |
1-4 (Copper ports） | Green | Yellow | |
Off：ports link down | Off: PoE not working | ||
On: ports link up | On: PoE working | ||
Blinking: data on TX/RX | |||
5（fiber ports）Green | Off: ports link down | ||
On: ports link up | |||
Blinking: data on TX/RX | |||
Power parameter | |||
Input voltage | 44-57VDC, redundant power input | ||
Input current | 3A Max | ||
Total consumption | Full loading without PoE ≤ 5 W PoE power budget ≤120W | ||
Connector | Removable 4-pin terminal block | ||
Reverse polarity protection | Support | ||
Over-voltage protection | Support | ||
Layer 2 function | |||
Port aggregation | Support static aggregation Support dynamic aggregation | ||
Port features | Support IEEE802.3x flow control, Support Port traffic statistics Support port isolation Support network storm suppression based on port bandwidth percentage | ||
VLAN | Support access mode Support trunk mode Support hybrid mode | ||
Port mirroring | Support many to one port mirroring | ||
Ring network protocol | Support STP、RSTP Support G.8032 ERPS protocol，single ring, sub Ring and associated sub ring Recovery time ≤20ms | ||
Multicast | IGMP V1,V2,V3 IGMP snooping | ||
QoS | Ingress Port-based Rate-limit Egress Port-based Rate-limit | ||
Security features | Support 802.1x，port authentication，MAC authentication，RADIUS service Support port isolation | ||
Management and maintenance | Support LLDP Support user management and login authentication Support SNMPV1/V2C/V3 Support web management, HTTP1.1, HTTPS Support Syslog and alarm grading Support RMON(Remote Monitoring) alarm Support NTP Support Ping , Tracert Support optical transceiver DDM function Support TFTP Client Support Telnet Server Support SSH Server Support IPv6 Management Support PoE management Support TFTP, web upgrading | ||
Switching features | |||
Switching capacity | 1Gbps | ||
Packet forwarding rate | 1.48Mpps | ||
MAC address table | 8K | ||
VLAN | 4K | ||
Buffer | 1M bit | ||
Forwarding delay | <100us | ||
Jumbo Frame | Support 10Kbytes | ||
MDX/MIDX | Support | ||
Watchdog | Support | ||
Mechanical structure | |||
Case protection | IP40 | ||
Installation method | Din-rail | ||
Dimension(W*D*H)mm | 30*98*130mm | ||
Weight | 0.55 kg | ||
Operating environment | |||
Operating temperature | -40℃~+75℃ | ||
Storage/transportation temperature) | -40℃~+85℃ | ||
Relative humidity | Operation humidity: 10%-90%RH Storage humidity: 5%-95%RH | ||
Industrial Standard | Surge protection of power: IEC 61000-4-5 Level 3 (4KV/2KV）（8/20us) | ||
Surge protection of Ethernet ports: IEC 61000-4-5 Level 3 (4KV/2KV）（10/700us) | |||
DIP: IEC 61000-4-11 Level 3（10V） | |||
ESD: IEC 61000-4-2 Level 4（8K/15K） | |||
Shock：IEC 60068-2-27 | |||
Free fall：IEC 60068-2-32 | |||
Vibration：IEC 60068-2-6 | |||
Certification | CE/FCC/RoHS | ||
Warranty | 5 years | ||
Model | Description |
DK3210MI-4FP1FS | Layer 2 Managed industrial Ethernet switch with 4*10/100Base-TX RJ45 PoE ports and 1*100Base-FX SFP slot, complies with IEEE802.3af, IEEE802.3at standard, DC44-57V input, redundant dual power supply, Din-rail installation. Fiber port transmission distance depending on the SFP module; Operation temperature: -40°C～+75°C |
DK3210MI-4FP1FS-SC | Layer 2 Managed industrial Ethernet switch with 4*10/100Base-TX RJ45 PoE ports and 1*100Base-FX SC port, complies with IEEE802.3af, IEEE802.3at standard, redundant dual power supply, Din-rail installation; Multi-mode/Single mode/ dual fiber/single fiber, 550m -100KM optional; Operation temperature: -40°C～+75°C |
DK3210MI-4FP1FS-FC | Layer 2 Managed industrial Ethernet switch with 4*10/100Base-TX RJ45 PoE ports and 1*100Base-FX FC port, complies with IEEE802.3af, IEEE802.3at standard, redundant dual power supply, Din-rail installation; Multi-mode/Single mode/ dual fiber/single fiber, 550m -100KM optional; Operation temperature: -40°C～+75°C |
DK3210MI-4FP1FS-ST | Layer 2 Managed industrial Ethernet switch with 4*10/100Base-TX RJ45 PoE ports and 1*100Base-FX ST port, complies with IEEE802.3af, IEEE802.3at standard, redundant dual power supply, Din-rail installation; Multi-mode/Single mode/ dual fiber/single fiber, 550m -100KM optional; Operation temperature: -40°C～+75°C |
Copy product links
Long by picture save/share
INQUIRY
Add Successfully
CONTACT US
Add: 403 Huijia Shopping Plaza, Nanlong Community, Nanwan Street, Longgang District, Shenzhen, China
Tel: +86-13691949606 (WeChat/WhatsApp/Skype)
Email: sales@dptek.com.cn
Scanning Code
Add WeChat
Copyright @ Shenzhen Dptek Technology Co., Ltd. All Rights Reserved
