DK3110I-16T2S


    16*10/100/1000Base-T + 2*1000Base-X SFP

    Unmanaged Industrial Ethernet Switch



    DC12-58V input, redundant dual power supply

    Operation temperature: -40°C~+75°C

    Din-rail installation



  • Parameters


    16*10/100/1000Base-T + 2*1000Base-X SFP

    Unmanaged Industrial Ethernet Switch



    DC12-58V input, redundant dual power supply

    Operation temperature: -40°C~+75°C

    Din-rail installation



Overview

 

The DPTEK DK3110I-16T2S is the highly reliable industrial Ethernet switch with 16-port 10/100/1000-T RJ45 and 2-port 1000Base-X SFP slots. It is featuring with link aggregation, flow control, QoS(1-2 ports) and broadcast storm restrain function, which all can be configured by the Dip switch on the top panel.

 

DK3110I-16T2S is also a high cost-effective easy-to-use device, which provides essential industrial Ethernet networking function, including wide range power input 12-58VDC, redundant power design with polarity reverse/over-voltage/over-current protection, robust IP40 fan-less housing with Din-rail installation, wide operation temperature from -40°C to 75°C as well as high-level EMI/EMC capability. It is the best choice for heavy industrial factory, transportation, oil & gas, chemical, IP Surveillance and processing automation area where environmental conditions are harsh and critical.


Features

 16*10/100/1000Base-T RJ45 ports, 2*1000Base-X SFP slots

 Redundant power DC 12-58V input with polarity reverse/over-voltage/over-current protection

 Support one channel output relay alarm(terminal block Pin 5/6) for DC power failure

  Support powerful Dip switch function:

1.Link aggregation;  2. Flow control;  3. QoS(1-2 ports) ;  4.Broadcast storm restrain

 Support 10K Bytes Jumbo frame

 Support 6KV surge protection and ESD: Air-15kV, Contact-8kV Protection

 IP40 fan-less and Din-rail hardware design

 Operation temperature: -40°C ~+75°C



Model No.

DK3110I-16T2S

Interface

Fiber ports

Copper RJ45 ports

2

16

Ethernet

16*10/100/1000Base-T

2*1000Base-X

Alarm port

One relay output for power failure. Alarm relay current carry ability: 1A@24VDC

Standard

IEEE 802.3 10Base-T Ethernet

IEEE 802.3u Fast Ethernet

IEEE 802.3ab Gigabit Ethernet

IEEE 802.3x Full-Duplex Flow Control

IEEE 802.3az Energy Efficient Ethernet

Dip Switch

1. Link aggregation

2. Flow control

3. QoS(1-2 ports

4. Broadcast storm restrain

LED Indicators

P(Power indicator) Green

Off: the device is power off or failed

On: the device power on is normal

S(System indicator) Red

Off: the chip is normal

On: the chip read/write is unnormal

1-16 (Copper ports)

Green indicators

Yellow indicators

Off: ports link down

Off: port on 10/100M

On: ports link up

On: port on 1000M

Blinking: data on TX/RX


17-18 (Fiber ports) Green

Off: ports link down

On: ports link up

Blinking: data on TX/RX

Power parameters

Input voltage

12-58VDC, redundant power input

Input current

0.8A Max

Total power consumption

Full loading≤10W

Connector

Removable 6-pin terminal block, Pin 5/6 for relay alarm output

Reverse polarity protection

Support

Over-voltage protection

Support

Over-current protection

Support

Switching features

Switching capacity

36G

Packet forwarding rate

53.5Mpps

MAC address table

8K

VLAN

4K

Buffer

2M

Forwarding delay

<5us

Jumbo Frame

Support 10Kbytes

MDX/MIDX

Support

Watchdog

Support

Network Topology

Star topology

Support

Bus topology

Support

Tree Topology

Support

Mechanical structure

Case protection

IP40

Installation method

Din-rail

Dimension(W*D*H)mm

54*115*158mm

Weight

1.41 Kg

Operating environment

Operating temperature

-40℃~+75℃

Storage/transportation temperature

-40℃~+85℃

Relative humidity

5%~95%non-condensing

Industry standard

EMIFCC Part 15B Class A

Surge protection of power: IEC 61000-4-5  6KV/4KV8/20us

Surge protection of Ethernet portsIEC 61000-4-5  6KV/2KV10/700us

RS: IEC 61000-4-3 80 MHz-1 GHz10 V/m

EFT: IEC 61000-4-4  power interface: 4KEthernet ports: 2K

CS: IEC 61000-4-6 10V

ESD: IEC 61000-4-2  Level 48K/15K

Shock: IEC 60068-2-27

Free fall: IEC 60068-2-32

Vibration: IEC 60068-2-6

Certification

CE/FCC/RoHS

Warranty

5 years


















































































































Model

Description

DK3110I-16T2S

Unmanaged Industrial Ethernet switch with 16*10/100/1000Base-T RJ45 ports and 2*1000Base-X SFP slots, DC12-58V input, redundant dual power supply, Din-rail installation. Operation temperature: -40+75










DK3110I-16T2S
Long press to look detail
Long by picture save/share
INQUIRY

Online inquiry MORE+
  • Name *

  • Company Name *

  • Phone *

  • Email *

  • Inquiry *

  • Submit

  • Security Code
    Refresh the code
    Cancel
    Confirm

Inquiry Content:


You have no items to require

Add Successfully
图片展示

CONTACT US

Add: 403 Huijia Shopping Plaza, Nanlong Community, Nanwan Street, Longgang District, Shenzhen, China

Tel: +86-13691949606 (WeChat/WhatsApp/Skype)

Email: sales@dptek.com.cn 

Scanning Code

Add WeChat

Copyright @ Shenzhen Dptek Technology Co., Ltd. All Rights Reserved 

添加微信好友,详细了解产品
使用企业微信
“扫一扫”加入群聊
复制成功
添加微信好友,详细了解产品
我知道了