DK2210M-24T4X-HP
24*10/100/1000Base-T + 4*1G/2.5G/10G SFP+
Layer 2+ Managed Ethernet Switch
Redundant Hot-swap Power Supply (3 Optional):
Dual AC 100-240V hot-swap power supply
Dual DC 36-72V hot-swap power supply
One AC 100-240V hot-swap and one DC36-72V hot-swap power supply
- Parameters
24*10/100/1000Base-T + 4*1G/2.5G/10G SFP+
Layer 2+ Managed Ethernet Switch
Redundant Hot-swap Power Supply (3 Optional):
Dual AC 100-240V hot-swap power supply
Dual DC 36-72V hot-swap power supply
One AC 100-240V hot-swap and one DC36-72V hot-swap power supply
Overview
The DPTEK DK2210M-24T4X-HP series are the Layer 2+ managed Gigabit switch featuring advanced hardware architecture. They support redundant hot-swap power supply with flexible AC and DC option, which will not affect the normal operation of the switch, specifically designed to handle the demands of high-tech facilities requiring the highest power integrity. The switch also provide fault detection and alarms for power and fans. The fan speed can be automatically adjusted based on temperature changes to better adapt to various environments. The DK2210M-24T4X-HP series adopt the front-to-rear airflow to enhance the cooling efficiency. By using over-current, over-voltage, and overheating protection technologies, the DK2210M-24T4X-HP achieve device-level and link-level reliability protection.
The series deliver full Gigabit access and unparalleled scalability to 10G performance. They provide high-density performance, Layer 3 IPv4/IPv6 static routing with 128 Gbps switching capacity. The DK2210M-24T4X-HP series provide comprehensive end to end QoS as well as flexible and rich management , security settings, which can meet the high speed, secure and smart requirement for small and medium-size enterprise networks. The powerful network security features also make the DK2210M-24T4X-HP perform effective data traffic control for ISP and enterprise VoIP, video streaming, and multicast applications.
Features
➢4*1G/2.5G/10G SFP+ ports uplink, 24*10/100/1000M RJ45 ports downlink, 1*RJ45 console port , 1*OOB port and 1* USB 2.0 port for switch basic management and setup
➢ Offer 1+1 power module redundancy ( AC, DC are optional)
➢ Automatic power and fan status monitoring and alarming mechanisms
➢ Automatic fan speed adjustment based on the change in temperature
➢ Self-protection mechanisms that protect power supply against over-current, over-voltage, and over-temperature conditions
➢ Layer 3 features: Supports IPv4/IPv6 static routing, DHCP server
➢ Port aggregation: Supports GE ports, 2.5GE and 10GE port aggregation, static and dynamic aggregation
➢ VLAN : Supports access, truck, hybrid mode and VLAN classification, including the Mac based VLAN, IP based VLAN and protocol based VLAN
➢ GVRP: Supports normal mode, fixed mode and forbidden mode
➢ QinQ: Supports port-based, VLAN-based and flow-based QinQ
➢ Port Mirroring: Many to one port mirroring
➢ Layer 2 ring network protocol: Supports STP, RSTP, MSTP, G.8032 ERPS protocol, single ring, sub ring
➢ Multicast: Supports IGMP snooping
➢ QoS: QoS class, remarking, Supports SP, WRR queue scheduling, Ingress/Engress port-based rate-limit and policy-based QoS
➢ Security: Support Dot1x, port authentication, mac authentication, RADIUS service; Support port-security, ip source guard, IP/Port/MAC binding, arp-check and ARP packet filtering for illegal users and port isolation
➢ Management: Supports LLDP, user management and login authentication; SNMPV1/V2C/V3; web management, HTTP1.1, HTTPS; Syslog; RMON (Remote Monitoring) alarm, event and history record; NTP, temperature monitoring; Ping, Traceroute , optical transceiver DDM function and copper port cable detection; Supports TFTP Client, Telnet Server, Telnet Client, SSH Server and IPv6 Management
➢ Firmware update, configure backup/restore through Web GUI, FTP and TFTP
Model | DK2210M-24T4X-HP | |
Fixed ports | 4*1G/2.5G/10G SFP+ ports, 24*10/100/1000M RJ45 ports | |
Console port | 1*RJ45 Console | |
USB port | 1*USB 2.0 | |
OOB port | 1*OOB | |
Switching capacity | 128Gbps | |
Packet forwarding rate | 190.4Mpps | |
MAC address table | 16K | |
Buffer | 12M bit | |
Port aggregation | Support gigabit port, 2.5GE and 10GE port aggregation Support static and dynamic aggregation | |
Port features | Support IEEE802.3x flow control, Port traffic statistics, port isolation Support network storm suppression based on port bandwidth percentage | |
VLAN | Support access, trunk and hybrid mode | |
VLAN Classification | Mac Based VLAN IP Based VLAN Protocal Based VLAN | |
GVRP | Normal mode Fixed mode forbidden mode | |
QinQ | Basic QinQ (Port-based QinQ) Flexible Q in Q(VLAN-based QinQ) QinQ(Flow-based QinQ) | |
Port mirroring | Many to one (Port Mirroring) | |
Layer 2 ring network protocol | Support STP、RSTP、MSTP Support G.8032 ERPS protocol，single ring, sub ring and other ring | |
Loop detect | Loop detect based on ports | |
loop detect based on ports and VLAN | ||
DHCP | DHCP Client DHCP Snooping DHCP server | |
ARP | ARP table aging | |
IPv4/IPv6 | Static routing | |
Multicast | IGMP snooping | |
ACL | IP Standard ACL MAC extend ACL IP extend ACL | |
QoS | QoS Class, Remarking Support SP, WRR queue scheduling Ingress Port-based Rate-limit Egress Port-based Rate-limit Policy-based QoS | |
Security | Support Dot1x, port authentication, mac authentication, RADIUS service Support port-security Support ip source guard, IP/Port/MAC binding Support arp-check and ARP packet filtering for illegal users Support port isolation | |
Management and maintenance | Support LLDP Support user management and login authentication Support SNMPV1/V2C/V3 Support web management, HTTP1.1, HTTPS Support Syslog Support RMON (Remote Monitoring) alarm, event and history record Support NTP Support temperature monitoring Support Ping、Tracerout Support optical transceiver DDM function Support TFTP Client Support Telnet Server, Telnet Client Support SSH Server Support IPv6 Management Support FTP, TFTP, WEB upgrading | |
Dimension(mm) | 440*350*45mm | |
Power supply and consumption | Power Supply slots | 2 |
Maximum power consumption | ＜30W | |
Input voltage | AC power supply: AC 100-240V, frequency: 50/60Hz | |
Fan | 3*Fans, support automatic fan speed adjustment | |
Power surge protection | 6KV, IEC 61000-4-5 Level X（8/20us） | |
Ethernet ports surge protection | 4KV, IEC 61000-4-5 Level 4（10/700us） | |
Working temperature | 0℃-50℃ | |
Humidity | Working humidity：10%-90%RH Storage humidity：5%-95%RH | |
Model | Description |
DK2210M-24T4X-HP-2AC | Layer 2+ managed Ethernet switch with 4*1G/2.5G/10G SFP+ ports + 24*10/100/1000M RJ45 ports, dual AC 100-240V hot-swap power supply |
DK2210M-24T4X-HP-2DC | Layer 2+ managed Ethernet switch with 4*1G/2.5G/10G SFP+ ports + 24*10/100/1000M RJ45 ports, dual DC36-72V hot-swap power supply |
DK2210M-24T4X-HP-AD | Layer 2+ managed Ethernet switch with 4*1G/2.5G/10G SFP+ ports + 24*10/100/1000M RJ45 ports, one AC 100-240V hot-swap and one DC36-72V hot-swap power supply |
Copy product links
Long by picture save/share
INQUIRY
Add Successfully
CONTACT US
Add: 403 Huijia Shopping Plaza, Nanlong Community, Nanwan Street, Longgang District, Shenzhen, China
Tel: +86-13691949606 (WeChat/WhatsApp/Skype)
Email: sales@dptek.com.cn
Scanning Code
Add WeChat
Copyright @ Shenzhen Dptek Technology Co., Ltd. All Rights Reserved
